Description
Takeuchi TB175 and TB175W Manual Set is a three-publication technical collection covering the TB175 excavator and TB175W wheeled hydraulic excavator. It combines two factory workshop manuals with a dedicated TB175W parts manual, providing 2,601 pages of service, repair and parts-reference information.
The workshop manuals are intended for trained personnel engaged in machine maintenance. Confirmed coverage includes disassembly and reassembly procedures, inspection and maintenance, reference values, troubleshooting and outline specifications. Separate publications are supplied for the TB175 and TB175W, with model-specific book numbers and serial-number applicability.
The accompanying TB175W parts manual provides the corresponding publication for component and replacement-parts identification. This set is suitable for professional repair workshops, fleet engineers and experienced technicians maintaining the applicable Takeuchi excavators.
MANUALS INCLUDED
- TB175W Hydraulic Excavator Workshop Manual — Book No. CW3E001; serial No. 17540001 onwards; 851 pages.
- TB175 Workshop Manual — Book No. CL3E003; serial No. 17510003 onwards; 978 pages.
- TB175W Parts Manual — Book No. BW2Z005; serial No. 17520003 onwards; 772 pages.
GENERAL WORKSHOP INFORMATION
The workshop publications begin with essential information for safely preparing and carrying out maintenance work. They explain machine orientation, identification of the serial-number plate and conventions used throughout the manuals. Confirmed general subjects include:
- Workshop safety precautions
- Disassembly and assembly cautions
- Removal and installation of hydraulic units
- Removal and installation of hydraulic piping
- Correct handling of seals
- Tightening-torque information
- Machine identification and orientation
- Safe support of machines and working equipment
MACHINE SPECIFICATIONS AND CONFIGURATION
Dedicated specification and machine-configuration sections provide the reference information needed when inspecting, dismantling and reassembling the applicable excavator. These sections support correct identification of machine arrangements and comparison with the maintenance reference values stated by the manufacturer.
- Outline specifications
- Machine configuration information
- Maintenance reference values
- Component location and arrangement guidance
- Model-specific workshop data
HYDRAULIC UNITS
Both workshop manuals contain a principal section devoted to hydraulic units. The manuals also provide precautions for removing and installing hydraulic components, disconnecting piping and handling seals. This information is particularly useful during planned overhaul, fault investigation and component replacement.
- Hydraulic-unit service information
- Hydraulic component removal and installation
- Hydraulic piping precautions
- Seal handling requirements
- Disassembly and reassembly procedures
- Inspection and maintenance guidance
- Air-bleeding procedures where specified
- Reference values for maintenance work
ENGINE
Each workshop manual includes a dedicated engine section for the engine-related service information applicable to its respective machine. Technicians should select the correct publication by model and machine serial number before beginning work.
- Engine service information
- Engine inspection and maintenance
- Disassembly and reassembly guidance
- Applicable reference values
- Engine-related troubleshooting information
TROUBLESHOOTING AND REPAIR
Troubleshooting is a confirmed main division within both workshop manuals. It is supported by the manuals’ inspection procedures, maintenance values and model-specific technical information, allowing reported symptoms and test findings to be assessed against the correct factory reference.
- Systematic troubleshooting information
- Inspection and check procedures
- Maintenance reference values
- Fault investigation guidance
- Disassembly and reassembly instructions
- Removal and installation precautions
TB175W PARTS IDENTIFICATION
The separate TB175W parts publication, Book No. BW2Z005, is included for machines from serial No. 17520003 onwards. As a parts manual, it is intended for illustrated component identification, assembly and sub-assembly reference, and selection of the applicable replacement parts. It should be used alongside the workshop manual when planning repairs or ordering components.
TAKEUCHI TB175 AND TB175W MANUAL SET COVERAGE
- TB175: Workshop Manual, serial No. 17510003 onwards.
- TB175W: Workshop Manual, serial No. 17540001 onwards.
- TB175W: Parts Manual, serial No. 17520003 onwards.
The serial ranges differ between publications and must be checked individually against the machine identification plate.
MANUAL DETAILS
- Manufacturer: Takeuchi
- Models: TB175 and TB175W
- Manual type: Two workshop manuals and one parts manual
- Publication numbers: CW3E001, CL3E003 and BW2Z005
- Combined page count: 2,601 pages
- Format: Digital PDF manual set
This Takeuchi TB175 and TB175W Manual Set keeps the service information for both models together while preserving the separate publication identity and serial applicability of each manual. It is particularly useful to workshops responsible for both the tracked TB175 and wheeled TB175W.
Always confirm the machine model and serial number before applying workshop procedures or selecting parts. The three manuals have different starting serial numbers and should not be treated as having identical applicability.
Reviews
There are no reviews yet.