Description
Yanmar KMH60A KMH61A Service Manual provides model-specific workshop information for servicing, testing, dismantling, inspecting, adjusting and rebuilding the KMH60A and KMH61A marine gear units under publication number 0B7752-G0001.
WHAT THIS MANUAL CONTAINS
- Introduction – explains the purpose of the service manual, repair instructions for KMH transmissions, revision history and the revision control table used to identify updated pages and changes.
- Safety – covers safety precautions, preparation before servicing and precautions for safe servicing, including the warning and caution information that applies during repair, operation and maintenance work.
- General Service Information – introduces the marine gear system and provides the specifications needed when assessing the unit and planning service work.
- Marine Gear Component Location – identifies the principal marine gear components so the technician can relate the written procedures to the assembled transmission.
- Case Plate Component Location – identifies the components associated with the case plate and supports accurate removal, inspection and reassembly.
- Hydraulic Diagram – shows the hydraulic circuit arrangement used by the marine gear, assisting with system understanding and fault investigation.
- Shifting Pressure – provides the shifting-pressure information used when checking hydraulic operation and evaluating the gear-shift system.
- Function Test – sets out the functional checks used to assess marine gear operation after service work.
- Required Tests – lists the tests required for evaluation of the transmission and its operating performance.
- Standard Value of Performance – gives the performance values used as a reference when checking the marine gear during testing and adjustment.
- Overhaul – provides the main dismantling, cleaning, inspection, adjustment and rebuilding procedures for the KMH60A and KMH61A marine gear.
- Before You Begin Servicing – sets out preliminary servicing considerations before opening or dismantling the marine gear.
- Before You Operate – covers checks to make before operating the unit during the service and testing process.
- During Operation and Maintenance – addresses precautions and service considerations while the marine gear is operating or receiving maintenance.
- Past Inspections for the Engine and the Marine Gear – identifies previous inspection information that should be considered when assessing the engine and transmission condition.
- Special Service Tools and Measuring Instruments – identifies the special tools and measuring equipment required for correct overhaul, measurement and adjustment work.
- Standard Tools and Torque Chart – provides the standard tooling information and torque references needed during disassembly and final assembly.
- Marine Gear Component Identification – identifies the internal components used in the marine gear and supports correct parts recognition during overhaul.
- Marine Gear Sectional View – provides a sectional representation of the transmission to show the relationship between the shafts, gears, bearings, clutch components and housing.
- Case Plate Component Identification – identifies case plate parts before removal and during reassembly.
- Preparing for Overhaul – covers preparation for dismantling and the procedures needed before starting the overhaul sequence.
- Disassembly of Marine Gear – includes draining transmission oil, removing the oil filter, dipstick, output coupling, hydraulic oil pump, case plate, valves, mounting feet, oil seals, baffle plate, oil suction cover, seal rings, tapered roller bearings, inner races, clutch pack and clutch discs.
- Cleaning of Marine Gear – provides the cleaning stage required before detailed inspection of the housing, shafts, gears, bearings and friction components.
- Inspection of Marine Gear – covers inspection of cases, bearings, shafts and gears, friction discs and thrust collars to determine serviceability before rebuilding.
- Reassembly of Marine Gear – includes rebuilding the input shaft and support shaft, friction assembly, pinion gear assemblies, thrust collars, tapered roller bearings, seal rings and output shaft bearing.
- Gear Backlash and Bearing Adjustment – covers adjustment of gear backlash, bearing clearance, bearing preload and play, including installation of bearing races and the gear set into the housing.
- Final Assembly – includes assembly of the cases, mounting flange, valves, case plate, oil filter, hydraulic oil pump and output coupling.
- Oil Filling and Level Checking – covers filling the marine gear with oil, recommended oil type and checking the oil level after assembly.
- Trial Run – provides the post-assembly operating check used to confirm marine gear function.
- Troubleshooting – provides a fault-finding reference for investigating operating problems after service or during functional testing.
MODELS COVERED
Yanmar KMH60A and Yanmar KMH61A marine gear units.
Yanmar KMH60A KMH61A Service Manual – MANUAL DETAILS
- Manufacturer: Yanmar
- Machine type: Marine gear / marine transmission
- Manual type: Workshop service repair manual
- Format: Digital PDF
- Publication number: 0B7752-G0001
- Page count: 98 pages
HOW THIS MANUAL HELPS
This Yanmar KMH60A KMH61A Service Manual is intended as a repair reference for technicians working on the specified marine gear models. It brings together safety guidance, system information, testing values, overhaul procedures and troubleshooting in one technical reference. The disassembly, inspection, adjustment and reassembly sections help organise a repair from initial preparation through final trial run. Component locations, sectional views, tool information and torque references support accurate work on the transmission.
For a technician planning an overhaul, the Yanmar KMH60A KMH61A Service Manual provides the sequence from draining oil and removing components through inspection of bearings, shafts, gears, friction discs and thrust collars. The rebuilding information covers the input and support shafts, friction assembly, pinion gear assemblies, thrust collars, seal rings and tapered roller bearings. It also includes the adjustments required for gear backlash, bearing clearance, preload and play before final assembly.
The testing information is useful when checking hydraulic operation and marine gear performance. The manual identifies the marine gear system, hydraulic diagram, shifting pressure, function tests, required tests and standard performance values. After assembly, the oil-filling, oil-level, trial-run and troubleshooting sections provide a structured reference for completing service checks on the KMH60A and KMH61A units.
Use the Yanmar KMH60A KMH61A Service Manual alongside suitable workshop equipment and safe servicing practices. The publication is specific to the KMH60A and KMH61A marine gear models and is identified by publication number 0B7752-G0001.
Browse all Yanmar manuals available from Agrimanual.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will receive our download information file by email straight away; it explains how delivery works. Your manual will then be manually checked and sent to the email address used during checkout, normally within 1 to 2 hours and always within 24 hours.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery
