Description
Same Dorado F 55 Workshop Manual is a digital workshop service and repair manual for the Same Dorado F 55 tractor, with the associated model coverage identified as Dorado F 55, F 70, F 75, F 90 and F 100. It is intended as a practical technical reference for repair technicians, agricultural mechanics and owners carrying out inspection, servicing, fault diagnosis, dismantling, repair and reassembly work.
The manual provides structured workshop guidance rather than operator instructions or an illustrated parts catalogue. Its technical material explains safe working methods, machine inspection, fault-finding principles, dimensional checks, tightening torques, adjustment data and procedures for removing and refitting tractor components. The digital PDF format is suitable for viewing on a computer, tablet or smartphone and can be used as a reference during workshop repairs.
WHAT THIS MANUAL CONTAINS
- Introduction and workshop guidance – purpose of the manual, use by repair technicians, correct repair methods and guidance intended to improve the quality and accuracy of service work.
- General safety rules – precautions for working on a tractor requiring repair or overhaul, including safe access to the cab, protection from moving parts, ventilation, engine-running hazards and the use of suitable protective clothing and equipment.
- Electrical safety – battery disconnection procedures, battery charging precautions, electrolyte hazards, electrical-system isolation and precautions before welding or working around electronic control units and the alternator.
- Fuel, oil, coolant and lubricant precautions – safe handling of fuel and fluids, prevention of fire hazards, protection from used oils, correct disposal of waste lubricants and precautions when topping up or draining systems.
- Hydraulic and pneumatic system safety – release of residual pressure before work begins, allowing hot oil and coolant to cool, and precautions for working on pressurised circuits.
- Removal and refitting operations – preparation before dismantling, lowering equipment, plugging disconnected hydraulic and fuel pipes, securing cylinders, draining fluids and marking parts, pipes and wiring before removal.
- Component identification and reassembly control – checking alignment marks, recording shims, protecting exposed openings from dirt, handling electrical connectors correctly and maintaining the correct position of parts during refitting.
- Seals, O-rings and retaining hardware – replacement of seals, O-rings, cotter pins and safety stop rings during reassembly, together with checks on circlips and other retaining components.
- Sealant and mating-surface preparation – cleaning surfaces, removing oil, grease, oxidation, carbon deposits, burrs and indentations, and applying sealant as a continuous film around fixing holes.
- Lubrication during assembly – coating moving parts with a thin film of engine oil and carrying out post-assembly lubrication of pivot mountings, stub axle housings and drive shafts where required.
- Electrical connector and wiring practices – cleaning connectors, reconnecting plugs without damaging terminals, routing wires correctly and refitting wiring looms with their original retaining straps or brackets to prevent vibration damage.
- Fastener tightening and adjustment data – use of specified tightening torques, even tightening of flanged fittings in a cross-wise sequence, and attention to torque values and adjustment information provided within repair procedures.
- Lifting and supporting the tractor – requirements for supporting large or heavy components, use of suitable jacks, stands, blocks, hoists, cranes, wire ropes and polyester slings, and precautions against overturning or uncontrolled movement.
- Heavy-component handling – lifting-capacity guidance, correct positioning of hooks and slings, use of more than one lifting rope where necessary, safe sling angles and the prohibition on working beneath suspended loads.
- Completion checks after repair – refilling coolant and hydraulic oil, circulating fluids and checking levels again, filling the casing of a variable-displacement pump where applicable, greasing specified areas and carrying out final installation checks.
- Workshop inspection and diagnosis principles – visual inspections, dimensional checks, fault-diagnosis work, correct use of repair equipment and the need to follow the prescribed methods rather than improvised tools.
MODELS COVERED
The exact manual identity is associated with the Same Dorado F tractor range covering F 55, F 70, F 75, F 90 and F 100 models. The owner-selected listing is centred on the Same Dorado F 55 tractor.
MANUAL DETAILS
Manufacturer: Same
Models Covered: Dorado F 55, F 70, F 75, F 90 and F 100
Machine Type: Agricultural tractor
Manual Type: Workshop service and repair manual
Format: Digital PDF
Publication Number: Not stated
Serial/PIN Range: Not stated
Page Count: Not stated
This Same Dorado F 55 Workshop Manual is a useful technical reference for planned repairs and workshop preparation, particularly where safe dismantling, component handling, inspection, adjustment, torque control and correct reassembly are important. Buyers should use the model identification and technical data in the manual to confirm applicability before beginning work on a specific tractor.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will instantly receive our download information file by email. Your manual will then be manually checked and sent to the email address used during checkout, usually within minutes and normally within 1 hour.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery
Reviews
There are no reviews yet.