Workshop manuals for agricultural & construction machinery

Trusted Since 1995
Digital PDF manuals • Worldwide service

Claas Dominator 108 SL/S Parts Catalogue – Pub No. 185.675.1 — SKU: Claas 315

£29.00

The Claas Dominator 108 SL/S Parts Catalogue is an 836-page digital PDF covering exploded parts views, identification numbers, assemblies, variants and machine-number notes for the 108 SL and 108 S combine harvesters.

Description

Claas Dominator 108 SL S Parts Catalogue

Claas Dominator 108 SL/S Parts Catalogue provides an illustrated spare-parts reference for the Dominator 108 SL and 108 S combine, with assembly drawings, part numbers, quantities, variant notes and serial applicability.

Claas Dominator 108 SL S Parts Catalogue – WHAT THIS MANUAL CONTAINS

  • Cutterbar unit – Parts for 3.9 m, 4.2 m, 4.5 m and 5.1 m cutterbars, including dividers, knife bar, guards, stone guards, cutterbar drive, knife drive, intake drum, reel frame, reel-speed adjustment, control drive and spring-tine reel assemblies.
  • Large cutterbar equipment – Components for 6.0 m to 9.0 m cutterbars, including trough sections, left and right shields, PTO shaft, countershafts, multifinger intake drum and associated header drive parts.
  • Divider variants – Long divider, short divider and special curved divider arrangements, with variant references for the different divider lengths, stripper assemblies and divider tubes.
  • Feeder housing – Standard and long feeder channels, including the 1177 mm shaft-spacing arrangement, the 1463 mm shaft-spacing arrangement, feeder shafts, intake drums, multifinger tines and feeder-house components.
  • Threshing and separation – Threshing drum, concave, awner, concave adjustment, beater, front and rear raffers, walkers, return pan, grain pan, shaker, sieve-frame hangers, sieve frame, shoe, sieves and throughput-monitor equipment.
  • Cleaning system – Sieve assemblies, blower equipment, blower adjustment, wind-reduction arrangements, shoe drive, grain-pan parts and related cleaning-system hardware.
  • Grain handling – Grain augers, returns elevator and outlet, grain elevator head, tank filling, distributing auger, grain tank unloading, unloading-tube drive and unloading tube components.
  • Operator platform and cab – Front ladder, platform, railings, cab structure, cab heater, air-conditioning equipment with York compressor, seat, steering components, foot controls, brake and clutch actuation.
  • Controls and instruments – Ground-speed pedal, 6/9-way valve control, instrument box, travel controls, drum-speed valve control, cutting-height preselection and indicator, engine actuation, gear shift, control tunnel, handbrake, concave lever and tank-tube valve control.
  • Central electrics and lighting – Power supply, front console, travel-lever position switch, high-pressure hydraulic control, feeder-house harness, relief indicator, Contour-System ground-pressure sensors, low-pressure hydraulic harness, grain-tank-full sensor, work lights, main harnesses, connectors and safety equipment.
  • Main drives – Hydraulic-pump drive, threshing-unit belt tension and drive, header clutch, header-drive tension, tank-drive tension, tank countershaft, longitudinal auger drive, blower adjustment, shoe and auger drive, walker drive and distributing-auger drive.
  • Drum and rotor drives – Drum-control drives, drum chain drives, rotor-drive components and the related belts, chains, tensioning parts and drive hardware shown in the exploded views.
  • Travel drive and transmission – Linde and Rexroth hydrostatic travel drives, gearbox, differential, brakes, axle drive, travel-control drive, clutch, tyres, track widening, steering-axle arrangements and drive axle components.
  • Body and housings – Feeder-to-machine transition sheets, drum flap, stone trap, drum housing, wind board, splash cloth, walker housing, blower housing, intake guards, trough, steering-axle suspension, straw hood, lighting, engine cladding and radiator screen.
  • Grain tank and external panels – Radiator connections, grain-tank roof and extension, tank structure, side panels, fuel-tank bracket, rear ladder and associated bodywork and mounting parts.
  • Hydraulic valves and blocks – Pump, 6/9-way valve, foot valve, solenoid valve block, valve block, 4/3-way and 3/3-way valves, relief arrangements, lock blocks and hydraulic control components.
  • Hydraulic cylinders – Cylinders for threshing engagement, tank engagement, header, reel, unloading tube and steering, including arrangements for the different header widths and steering variants.
  • Hydraulic lines and filters – Low-pressure lines, pump-to-block lines, block-to-consumer lines, header and reel circuits, drum-control lines, travel and steering lines, cooler coil, filter, 3-D control, Linde travel lines and Rexroth travel lines.
  • Engine installations – Fuel tank, additional fuel filter, Mercedes OM 421 engine accessories, Perkins V8.540 accessories and engine electrics, RABA D 2356 HM 6 accessories, engine harnesses, battery wiring and related engine-bay components.
  • Engine and wiring variations – Separate parts information for the Mercedes, Perkins and RABA engine installations, including the listed machine-number split affecting harnesses, panels and associated electrical items.
  • Straw chopper and spreaders – Chopper, cross cutter, deflector adjustment, electric deflector, maize-chopper equipment, chopper variants and straw-spreader components.
  • Optional equipment – Reel horizontal adjustment, header reversing drive, Bordinformator, CLAAS-Autopilot, hitch, automatic hitch, header trailer, jockey wheel, transport wagon, winch, support wheel, lock block, cylinder and related lines.
  • Drive elements and parts identification – Belts and chains parts lists, exploded illustrations, callout numbers, CLAAS part numbers, designations, quantities, DIN hardware information, variant codes, machine-number notes and serial applicability markings.

MODELS COVERED

Claas Dominator 108 SL and Claas Dominator 108 S combine harvesters.

HOW THIS MANUAL HELPS

This parts catalogue helps identify assemblies before ordering replacement components for the Claas Dominator 108 SL/S. Use the exploded views to locate a component, then check the corresponding part number, quantity and variant or machine-number note. The catalogue is particularly useful where header width, feeder-house length, engine installation or hydrostatic-drive supplier affects the correct part selection. It is a parts-identification reference rather than a repair-procedure manual.

Claas Dominator 108 SL/S Parts Catalogue – MANUAL DETAILS

  • Maker: Claas
  • Models: Dominator 108 SL and Dominator 108 S
  • Machine type: Combine harvester
  • Manual type: Parts catalogue
  • Format: Digital PDF
  • Publication number: 185.675.1
  • Edition information: May 1988
  • Page count: 836 pages
  • Applicability: From combine or machine number 094 00 011
  • Languages represented: German, English, French, Danish, Swedish, Dutch, Italian, Spanish, Portuguese and Hungarian

The Claas Dominator 108 SL/S Parts Catalogue is arranged around illustrated parts plates and corresponding text listings. Each drawing identifies the assembly and callout position, while the accompanying list gives the associated part number, description, quantity and, where applicable, DIN hardware information or variant remark. The catalogue uses serial and machine-number notes to distinguish different executions, making those references important when selecting components for an individual combine.

For the header, the Claas Dominator 108 SL/S Parts Catalogue separates the shorter and longer cutterbar arrangements and records alternative divider, knife, reel, intake-drum and feeder-house equipment. The feeder section distinguishes the standard channel with 1177 mm shaft spacing from the long channel with 1463 mm shaft spacing. These differences can affect shafts, drums, housings, drive parts and associated mounting hardware, so the relevant variant marking should be checked before a part is ordered.

The threshing and cleaning sections cover the drum, concave, beater, walkers, return pan, grain pan, shaker, sieve frame, shoe, sieves, blower and throughput-monitor parts. Grain-handling listings continue through the grain augers, returns elevator, grain elevator, tank filling, distributing auger, tank unloading and unloading tube. Together, these sections provide a structured way to trace a worn or damaged assembly back to its illustrated location and listed identification number.

Cab, platform and control sections include the front ladder, railings, seat, steering, pedals, brakes, clutch actuation, instrument box, travel controls, drum-speed control, cutting-height indicator, engine controls, gear shift and tank-tube controls. The electrical listings include harnesses, consoles, sensors, lighting, connectors, safety equipment and Contour-System components. Parts associated with cab heating and York air-conditioning equipment are also included where shown for the relevant configuration.

The Claas Dominator 108 SL/S Parts Catalogue also separates major travel-drive and hydraulic alternatives. Linde and Rexroth hydrostatic systems have their own drive and line listings, while hydraulic sections identify pumps, valves, solenoid blocks, lock blocks, cylinders, filters and lines for header, reel, threshing, tank, unloading and steering functions. This arrangement helps prevent parts from different drive or hydraulic executions being mixed together.

Engine-installation listings cover Mercedes OM 421, Perkins V8.540 and RABA D 2356 HM 6 equipment, including accessories, engine electrics, fuel-related parts, harnesses and panels. The catalogue also includes bodywork, housings, radiator equipment, straw chopper and spreader options, hitch equipment, transport accessories and belts and chains. Variant codes and machine-number notes should be read alongside every relevant plate, especially where engine, header or hydrostatic configuration changes the parts selection.

As a digital PDF, the Claas Dominator 108 SL/S Parts Catalogue can be viewed on a computer, tablet or smartphone with a compatible PDF reader. Its detailed exploded views and numbered lists are intended for parts identification, maintenance planning, restoration work and workshop ordering for the specified Dominator 108 SL and 108 S models.

Browse all Claas manuals available from Agrimanual.

WHAT HAPPENS AFTER PURCHASE?

After purchase you will receive our download information file by email straight away; it explains how delivery works. Your manual will then be manually checked and sent to the email address used during checkout, normally within 1 to 2 hours and always within 24 hours.

WHY BUY FROM AGRIMANUAL?

  • Established in 1995 supplying technical manuals
  • Digital PDF manuals for agricultural and construction machinery
  • Large archive including rare and discontinued manuals
  • Worldwide service
  • Manual orders checked before delivery

Claas Dominator 108 SL S Parts Catalogue