Description
Claas Disco Plus Operators Manual is the operating, setting and servicing guide for the CLAAS DISCO 3450 Plus, DISCO 3050 and 3050 Plus, DISCO 3050 C Plus, DISCO 2650 and 2650 Plus, and DISCO 2650 C Plus disc mowers. It is intended for the day-to-day operator and covers safe use of the mower, preparation for work, field adjustments, maintenance and lubrication.
This is an operator’s manual, not a workshop repair manual or parts catalogue. It provides the practical information needed to attach the mower to the tractor, set it for mowing and transport, use the conditioning and swath equipment where fitted, carry out routine care, and identify common operating malfunctions.
WHAT THIS MANUAL CONTAINS
- Introduction and validity – manual scope, intended application and model/serial-number coverage.
- Machine identification – identification-plate location and the machine-number information needed when ordering parts or making service enquiries.
- Safety instructions – designated agricultural use, warning symbols, attached-machine precautions, transport safety, PTO operation, hydraulic-system safety, tyre safety and maintenance precautions.
- Cutting-unit safety – safe use of mower blades, blade fasteners, guards, canvases and hoods; checks for worn, damaged or missing cutting components.
- Technical data – machine technical data, sound-level information and calculation of axle loads, minimum ballast and total weight for tractor/mower combinations.
- Loading and unloading – handling instructions before the machine is put into service.
- Pre-operation checks – checks to complete before starting work and before coupling the mower to the tractor.
- Tractor attachment – hitch adjustment, fitting the machine, stand use, universal drive-shaft adjustment and fitting, and hydraulic connection guidance.
- Transport preparation – preparing the mower for road travel, transport position and road-safety requirements.
- Mowing operation – working position, use of safety equipment, cutting-height setting, collision protection and practical mowing instructions.
- Mower suspension – adjustment of suspension springs for correct field operation.
- Swath equipment – right-hand swath disc, optional left-hand swath discs, and related adjustment/use information for applicable DISCO models.
- Conditioner and swath plates – operating information for the DISCO 3050 C Plus and DISCO 2650 C Plus conditioner versions, including swath plates and the optional wide-distribution hood.
- Optional and accessory equipment – high cutting runners, additional runners, collision-protection/safety-frame equipment, swath discs and plates, PTO-speed changeover equipment, slip-yoke kits, hydraulic connecting parts and lighting adapter information.
- Routine maintenance – maintenance instructions for wheels and tyres, hydraulics, energy accumulators, bolts, lubrication and protective safety-frame devices.
- Drive systems – drive-belt tensioning, conditioner gearbox and mower-head maintenance points.
- Knife sections and cutting discs – knife-section box, changing cutting knives, blade replacement procedures for DISCO 3050 and 2650 models, mower-disc inspection and cutting-disc replacement.
- Conditioner tines and PTO shaft – fitting/removing conditioner tines and universal drive-shaft maintenance.
- Hydraulic servicing – hydraulic hose connections and hydraulic-cylinder maintenance guidance.
- End-of-season care and faults – storage procedures, connection and screw-fastener checks, plus a malfunctions section.
- Lubrication chart – lubricant guidance, lubrication safety precautions and lubrication points.
MODELS COVERED
- Claas DISCO 3450 Plus – Type 636, from serial number 636 0 1201.
- Claas DISCO 3050 / 3050 Plus – Type 638, from serial number 638 0 1048.
- Claas DISCO 3050 C Plus – Type 621, from serial number 621 0 1001.
- Claas DISCO 2650 / 2650 Plus – Type 637, from serial number 637 0 1001.
- Claas DISCO 2650 C Plus – Type 620, from serial number 620 0 1001.
MANUAL DETAILS
Manufacturer: Claas
Models Covered: DISCO 3450 Plus; DISCO 3050 / 3050 Plus; DISCO 3050 C Plus; DISCO 2650 / 2650 Plus; DISCO 2650 C Plus
Machine Type: Mounted disc mower
Manual Type: Operators Manual
Publication Number: 293 857.5
Format: Digital PDF
The Claas Disco Plus Operators Manual is particularly useful where the mower must be correctly matched to the tractor, set for transport or field work, maintained through the season, or prepared for storage. Coverage includes both standard mower versions and the applicable conditioner, swath-control and wide-distribution equipment fitted to the C Plus machines.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will instantly receive our download information file by email. Your manual will then be manually checked and sent to the email address used during checkout, usually within minutes and normally within 1 hour.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery
Reviews
There are no reviews yet.