Description
Claas Axion Cmatic Workshop Manual is a digital workshop service and repair manual for Claas Axion 810, 820 and 840 tractors fitted with the CMATIC transmission. It is intended for technical servicing, fault-finding, adjustment and repair work on the tractor’s major mechanical, hydraulic and electronically controlled systems.
This is a workshop-level repair reference rather than an operator’s handbook. The material includes technical procedures for the CMATIC transmission and its cartridge assembly, together with engine, fuel-injection, hydraulic and electrical-related service information. It is particularly useful where work requires removal and refitting, component identification, specified tightening practices, system checks or access to transmission electronic and hydraulic components.
WHAT THIS MANUAL CONTAINS
- Technical conventions and workshop reference data – symbols used during servicing, lubrication references, clearances, preload guidance, sealing compounds and tightening information.
- Fastener and hydraulic fitting torques – standardised torque tables for different hardware grades and sizes, plus tightening guidance for hydraulic couplings.
- Hydraulic line identification – reference information for suction, high-pressure, priming, control, lubrication, return, low-pressure, hydrostatic and static-pressure circuits.
- Engine service information – engine description and identification, torque and sealant requirements, and model-specific injector instruction data for CMATIC applications.
- Electronic fuel injection – electronic injection circuit information, injector command, high-pressure-pump control, injection-system operation, fuel-filter information and electronic protection functions.
- CMATIC transmission general procedures – transmission-specific torque and sealing requirements together with the main adjustment information for the CMATIC gearbox.
- CMATIC cartridge access – preliminary operations, access to the cartridge, and removal/refitting operations associated with surrounding components including the additional tank, right-hand step, battery/exhaust or pneumatic-reserve housing, and cab support.
- Transmission electronic control components – access, removal and refitting procedures for the TCU A57-4 and HCU A126 control modules.
- CMATIC cartridge cover and solenoid valves – cartridge-cover procedures and service operations for the transmission solenoid valves identified within the cartridge assembly.
- Transmission speed and pressure sensing – removal and refitting of rotational-speed sensors, oil-temperature sensing and lubrication-pressure and system-pressure sensing components.
- CMATIC hydraulic service parts – accumulator, suction strainer and pressure-filter removal and refitting procedures.
- CMATIC cartridge removal and installation – procedures to remove, refit and centre the transmission cartridge, including the use of locally made service tooling and centring studs where specified.
- Gearbox internal service – overhaul information for line shafting within the CMATIC gearbox casing.
- Transmission operating functions – technical descriptions relating to shift-to-neutral, manoeuvring gear, speed matching, skip shift, work and road modes, start ratio and front/rear decoupling functions.
- Component-location and circuit conventions – Claas component-number references and pneumatic graphic conventions used to interpret system documentation.
MODELS COVERED
- Claas Axion 810 CMATIC
- Claas Axion 820 CMATIC
- Claas Axion 840 CMATIC
The Claas Axion Cmatic Workshop Manual is focused on the CMATIC-equipped versions of these Axion tractor models. The listed procedures include model-specific references where required, especially within injector and transmission-related service information.
MANUAL DETAILS
Manufacturer: Claas
Models Covered: Axion 810 CMATIC, Axion 820 CMATIC and Axion 840 CMATIC
Machine Type: Agricultural tractor
Manual Type: Workshop service and repair manual
Format: Digital PDF
Primary Coverage: Engine and electronic injection, CMATIC transmission, transmission electronics, hydraulic connections and circuit conventions, adjustment, component removal/refitting, filters, sensors, solenoids, torque data and sealing information.
This Claas Axion Cmatic Workshop Manual is a practical technical reference for servicing the CMATIC drivetrain and related tractor systems, helping the mechanic work through the appropriate dismantling, inspection, adjustment and reassembly stages with system-specific information close at hand.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will instantly receive our download information file by email. Your manual will then be manually checked and sent to the email address used during checkout, usually within minutes and normally within 1 hour.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery
Reviews
There are no reviews yet.