Description
Case IH 3016 Parts Manual for compact tractors with Onan engines, covering illustrated parts identification, assembly references, part numbers, quantities, model variations and PIN guidance for accurate component selection.
WHAT THIS MANUAL CONTAINS
- Index, product identification numbers and serial-number guidance – Model and PIN references for the 3016, 3018, 3020, 4016, 4018 and 4020 compact tractors, including instructions for using serial numbers when ordering parts.
- Engine identification – Onan engine model and specification information, including the P216G-I, P218G-I and P220G-I engine applications associated with the covered tractors.
- Parts-ordering information – Correct part number, component description, required quantity, product model number, illustration reference and address information used to identify and order parts.
- Paint – Paint identification information and listed paint-related references for the tractor range.
- Engine section index – Alphabetical references for air cleaner, breather, camshaft, carburettor, connecting rod, crankshaft, cylinder block, cylinder head, electrical system, exhaust system, flywheel, fuel system, governor, oil pan, piston, PTO clutch, rotor, spark plug, starter, tank, throttle linkage and valves.
- Piston, crankshaft, flywheel and camshaft – Illustrated parts for standard and oversize pistons, piston pins and retaining rings, crankshaft-related components, flywheel, camshaft, connecting rods, timing components and associated hardware.
- Cylinder block and cylinder head – Short block assemblies, cylinder and crankcase components, bearings, crankshaft, camshaft, timing gear, connecting rods, pistons, piston rings, valves, valve guides, valve covers, tappets, head bolts, breather parts and gasket kits.
- Oil base, pump, filter and filler tube – Oil-level dipstick, filler tube, bracket, seals, oil pump components, oil filter-related parts, ignition rotor and associated fasteners.
- Governor – Governor gearcase, shaft and arm, yoke, governor cup stop, oil seals, bearing, ignition control and related hardware.
- Fuel system – Carburettor applications by model, carburettor mounting gasket, fuel tank liner, tank cushion, fuel hose, fuel filter, hose clamp and retaining clip references.
- Air cleaner – Air-cleaner components, wing nut and serial-number application notes for different production ranges.
- Exhaust pipes and covers – Left- and right-hand exhaust covers and pipes, exhaust gaskets, clamps, bolts, lockwashers and model-related component references.
- Baffles and shrouds – Engine shielding and related parts used around the engine and exhaust areas.
- PTO clutch – Electric PTO clutch components and associated parts references within the engine and electrical sections.
- Engine mounts and heat-exchanger mounts – Mounting components and related hardware for the covered compact tractor configurations.
- Frame, foot pads and belly pan – Main frame, oil-tank shield, latch, hinges, attachment pins, foot rests, access cover, belly pan, retainers and model/PIN-specific variations.
- Grille, hood and tool tray – Illustrated body and access-panel components, including model-specific hardware and support parts.
- Fenders and operator’s seat – Fender assemblies, seat components, seat supports and related parts for 3000- and 4000-series compact tractor models.
- Steering wheel and gear – Steering wheel, steering gear and associated mounting and linkage components.
- Front axle, wheels and rear axle – Front axle, spindles, retaining rings, lubrication fittings, front and rear wheel parts, hubs, bearings and axle-related hardware.
- Brakes – Brake pedal, actuating arm, return spring, neutral-return guide, parking-brake actuator and lubrication fittings.
- Transmission and final drive – Transmission case, differential, pinion, thrust washers, differential pins, brake idler gears, retaining rings, bolts and PIN-specific gear applications.
- Drawbar and tow hitch – Drawbar, tow-hitch bolts, lockwashers and related attachment hardware.
- Hydraulic system – Control valves, fittings, O-rings, hoses, hydraulic pump, reservoir, oil cap, heat exchanger, hydraulic motor, valve-to-motor lines, pump inlet and outlet connections, filter components and PTO-ready tube variations.
- Hydraulic drive motor – Motor housing, commutator and ring set, manifold, rotor assemblies, wear plate, drive link, thrust bearings, coupling shaft, housing, seals and switch-related parts for 3000- and 4000-series models.
- Control linkage and speed control – Speed-control linkage, control valve linkage, detent, spool, actuator, switch locator, cam and related retaining components.
- Electrical system – Wire harnesses, battery cables, headlights, taillights, voltage sensor, switches, battery, PTO clutch, PTO connector, seat-switch connector, diode kit and electrical hardware.
- Starter, solenoid, ignition and charging components – Starter and solenoid, stator, rectifier, spark plugs, ignition coil, spark-plug cables, condenser, ignition control and related electrical connections.
- Instruments and electrical hardware – Instrument-related parts, switches, connectors, fuse references, wiring components and hardware shown in the electrical illustrations.
- Decals and reflectors – Decal, rear-reflector and related identification components.
- Main alphabetical and numerical indexes – Alphabetical assembly lookup and numerical part-number references with page locations to help identify components across the catalogue.
MODELS COVERED
3016 compact tractor before PIN 14147800; 4016 before PIN 14149628; 3018, 3020, 4018 and 4020 compact tractors, all applicable units listed in the catalogue. The parts information includes Onan-powered configurations and model-specific production notes.
HOW THIS MANUAL HELPS
This parts catalogue helps identify assemblies and individual components before ordering or inspecting parts on a compact tractor. Illustrated views show how components are grouped, while reference numbers connect each item with its part number, description and required quantity. Model and PIN notes help distinguish different production arrangements. The alphabetical and numerical indexes provide practical routes to the relevant assembly or part reference.
Case IH 3016 Parts Manual – MANUAL DETAILS
- Maker: Case IH
- Models: 3016, 3018, 3020, 4016, 4018 and 4020
- Machine type: Compact Tractor
- Manual type: Parts Manual / Parts Catalogue
- Format: Digital PDF
- Publication number: 8-3042
- Serial range: 3016 before PIN 14147800
This Case IH 3016 Parts Manual is arranged around illustrated assemblies, model applications and part-number references rather than operating instructions or workshop repair procedures. Use the applicable model and PIN information when comparing components. The catalogue includes engine, chassis, transmission, hydraulic, drive, electrical and body-related sections for the listed compact tractors. For owners maintaining a 3016, the Case IH 3016 Parts Manual provides a structured reference for locating the correct assembly and checking the listed component description and quantity.
The engine coverage follows the Onan-powered configuration, with separate references for engine internals, lubrication, governor, fuel, air cleaner, exhaust, ignition, starter and charging equipment. Tractor sections continue through frame, axle, brakes, steering, transmission, final drive, hydraulics, hydraulic motor, wheels, fenders, seat and electrical equipment. PIN notes are included where parts change between production ranges, making the Case IH 3016 Parts Manual useful when an apparently similar component has more than one application. The Case IH 3016 Parts Manual also includes index material to support lookup by assembly name or part number.
ALSO LISTED UNDER THESE TITLES
This publication (8-3042) is also catalogued under these titles:
- Case 3018 Compact Tractors with Onan Engines Parts Catalogue
- Case 3020 Compact Tractors with Onan Engines Parts Catalogue
- Case 4016 Compact Tractors with Onan Engines – Before PIN 14149628 Parts Catalogue
- Case 4018 Compact Tractors with Onan Engines Parts Catalogue
- Case 4020 Compact Tractors with Onan Engines Parts Catalogue
Browse all Case IH manuals available from Agrimanual.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will receive our download information file by email straight away; it explains how delivery works. Your manual will then be manually checked and sent to the email address used during checkout, normally within 1 to 2 hours and always within 24 hours.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery
