Description
Allison 4th Generation Service Manual for 4000 Product Family vocational transmissions, paired with the WTEC II electronic controls troubleshooting reference for MD, HD and B Series transmissions, covering diagnosis, maintenance, overhaul and component-level repair information.
WHAT THIS MANUAL CONTAINS
- Introduction and Manual Use – Manual organisation, transmission identification, terminology, safety information and guidance for using the service procedures with the applicable transmission model.
- Allison 4th Generation Controls – Control-system references for the 4000 Product Family vocational models, including the relationship between electronic controls, transmission operation and diagnostic procedures.
- Electronic Control Unit and Diagnostic Data Reader/Tool – Electronic control unit information, diagnostic data reader or tool functions, display terminology and the control-system information used during fault diagnosis.
- Displays and Button Names – Shift-selector displays, button names, operating modes, monitor functions, selection commands and the transmission-range indications used during diagnostic work.
- General Information – Transmission identification, model distinctions, technical references, safety notices, service information and general workshop requirements.
- Description and Operation – Functional descriptions of the 4000 Product Family transmission, major assemblies, hydraulic operation, electronic control functions and the way the transmission modules work together.
- Preventive Maintenance – Maintenance requirements, inspection points, fluid and filter-related service information, external checks and routine procedures intended to support reliable transmission operation.
- General Overhaul Information – Overhaul preparation, cleanliness, recommended workshop practices, sealing compounds, fastener procedures, inspection standards and information needed before dismantling or rebuilding.
- Transmission Removal and External Components – Removal of external parts, oil coolers and associated components before internal transmission disassembly.
- Control Valve and Torque Converter Modules – Removal, inspection, servicing and installation information for the control valve and torque converter module assemblies.
- Main Shaft and Planetary Modules – Removal and servicing of the main shaft, planetary assemblies and related internal transmission components.
- Disassembly of Transmission – Transmission strip-down procedures arranged around the major assemblies, with component removal, inspection points and preparation for rebuilding.
- Rebuild of Subassemblies – Disassembly, inspection and reassembly of serviceable modules and subassemblies, including clutch, bearing, gear, bushing, sealing and thrust components.
- Torque Converter and Converter Housing Modules – Component identification, inspection and rebuilding procedures for the torque converter, converter housing and associated rotating parts.
- PTO Gear and Bearing Retainer Assemblies – Service information for PTO gear arrangements, bearing retainers, related bearings and associated housing components.
- Front Support and Oil Pump Module – Front support assemblies, pump housing, PTO pump housing, pump gears, bushings, wear plates, sleeves, seals and related fasteners.
- Rotating Clutch and C1/C2/C3/C4 Clutch Assemblies – Clutch drums, hubs, pistons, springs, balance pistons, friction plates, reaction plates, backplates, sealrings, retaining rings and thrust bearings.
- Main Shaft and P1, P2, P3 and P4 Planetary Assemblies – Planetary gearsets, sun gears, carriers, bearings, thrust components and the associated inspection and assembly requirements.
- C6 Adapter Housing Module – Adapter housing components, sealing parts, bearings and installation-related service information.
- Retarder Valve Body, Stator and Housing – Retarder-related valve-body, stator and housing components, with service and assembly references where applicable.
- Rear Cover and Output Shaft Modules – Rear-cover components, output shaft parts, bearings, seals and associated assembly procedures.
- Inspection and Wear Limits – Clutch, bearing, gear, bushing, sealring, gasket, sealing-surface and thrust-washer inspection, together with wear-limit and spring-data references.
- Assembly of Transmission – Reassembly of the serviced modules into the complete transmission, including component positioning, sealing, fastener and assembly checks.
- Torque Specifications and Technical Data – Torque information, spring data, dimensional checks, service limits and technical specifications needed during overhaul work.
- Cross-Section, Schematic and Exploded Views – Fold-out transmission cross-sections, schematic views and exploded views supporting component identification and assembly orientation.
- WTEC II Electronic Controls Troubleshooting – Troubleshooting coverage for MD 3060, MD 3066, MD 3560, MD 3560P, MD 3560R, MD 3070PT, HD 4060, HD 4560, HD 4560P, HD 4560R, B 300, B 400 and B 500 transmissions using WTEC II controls.
- Diagnostic Fault Investigation – Electronic-control fault diagnosis, diagnostic messages, control-system checks and troubleshooting procedures for the listed MD, HD and B Series applications.
MODELS COVERED
4000 Product Family: 4000 EVS, 4000 HS, 4000 MH, 4000 RDS, 4000 SP, 4000 TRV, 4500 EVS, 4500 HS, 4500 RDS, 4500 SP, 4700 EVS, 4700 RDS, 4700 SP, 4800 EVS, 4800 SP, B 500, T 425, T 450 and T 525.
WTEC II troubleshooting coverage: MD 3060, MD 3066, MD 3560, MD 3560P, MD 3560R, MD 3070PT, HD 4060, HD 4560, HD 4560P, HD 4560R, B 300, B 400 and B 500.
HOW THIS MANUAL HELPS
This service reference supports workshop diagnosis, preventive maintenance, transmission removal, inspection, overhaul and rebuilding work on the listed Allison vocational transmissions. The component-level sections help technicians follow the transmission from external removal through module disassembly, inspection and reassembly. The troubleshooting material provides an electronic-controls reference for investigating faults on the listed MD, HD and B Series applications. Always confirm the transmission model, controls configuration and identification plate before applying a procedure.
Allison 4th Generation Service Manual – MANUAL DETAILS
- Maker: Allison Transmission
- Models: 4000, 4500, 4700 and 4800 Product Family vocational transmissions; B 300, B 400 and B 500; selected T Series models; MD and HD Series WTEC II applications
- Machine type: Automatic transmissions and electronic transmission controls
- Manual type: Service manual and electronic controls troubleshooting manual
- Format: Digital PDF
- Publication numbers: SM4014EN and TS2470EN
- Page count: 174 pages confirmed for SM4014EN; combined file pagination is not confirmed
- Edition information: SM4014EN October 2005; TS2470EN revisions 1, 2 and 3 are identified
Browse all Allison Transmission manuals available from Agrimanual.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will receive our download information file by email straight away; it explains how delivery works. Your manual will then be manually checked and sent to the email address used during checkout, normally within 1 to 2 hours and always within 24 hours.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery
