Workshop manuals for agricultural & construction machinery

Trusted Since 1995
Digital PDF manuals • Worldwide service

Allison 1000 and 2000 Electronic Controls Troubleshooting Manual – Pub No. TS3192EN — SKU: Allison Transmission 22

£29.00

Allison 1000 2000 troubleshooting manual covering electronic controls, TCM operation, sensors, solenoids, wiring checks, diagnostic trouble codes and performance complaints. Publication TS3192EN provides structured testing information for technicians working on Allison 1000 and 2000 Product Families transmissions, supplied as a digital PDF for practical workshop reference.

Description

Allison 1000 2000 troubleshooting manual for diagnosing electronic control faults, transmission system inputs and outputs, diagnostic trouble codes, wiring circuits, connector conditions and performance complaints across the Allison 1000 and 2000 Product Families.

WHAT THIS MANUAL CONTAINS

  • Foreword — How to Use This Manual – Explains the purpose of the troubleshooting publication, how it works alongside Service Manual SM3191EN, Mechanics Tips MT3190EN and Parts Catalog PC3062EN, and how to use the contents and diagnostic information as a starting point for resolving transmission control problems.
  • Safety Information – Important safety notice, warnings, cautions and notes applying to the Allison transmission electronic control system, together with the manual’s service-literature and trademark information.
  • Section 1 — General Description – Describes the transmission electronic control system and its principal inputs, outputs and controlled functions.
  • Transmission – Covers the 1000 and 2000 Product Families electronic controls arrangement, closed-loop clutch control, programmed forward ranges, neutral and reverse operation, and the basic system input/output relationship.
  • Transmission Control Module (TCM) – Describes the microcomputer-based TCM, 12-volt and 24-volt configurations, signal processing, shift sequencing, shift timing, clutch pressure control, solenoid control and diagnostic information.
  • Shift Selector – Includes shift selector range positions, the manual selector valve and the neutral start backup switch (NSBU).
  • Throttle Position Sensor (TPS) – Covers the throttle position input used by the TCM for shift control and electronic diagnosis.
  • Speed Sensors – Describes the input or engine speed sensor, turbine speed sensor and output speed sensor, including their locations and connector orientation.
  • Control Valve Assembly – Explains the electro-hydraulic valve body, trim valves, torque converter clutch valve, exhaust backfill valve, control main relief valve, shift valves, control main pressure valve and manual selector valve.
  • Modulated Main Pressure – Covers the additional on/off solenoid and the conditions under which main pressure is reduced to increase cooler flow at low engine speed.
  • Wiring Harnesses – Describes the external wiring harness and internal wiring harness, their relationship with the transmission connector, solenoids and pressure switch manifold.
  • Section 3 — Electronic Controls Troubleshooting – Provides the system overview and explains how the TCM reads selector, speed and throttle inputs, commands shifts, monitors clutch operation and responds to electrical or non-electrical faults.
  • System Overview – Covers clutch-to-clutch shift control, trim solenoids, adaptive values, fast and slow adaptive operation, shift convergence, torque converter clutch control and fail-to-range operation.
  • Important Information in the Troubleshooting Process – Includes recommended wire-number interpretation, connector handling, harness movement during checks, resistance-check considerations, terminal inspection, connector cleaning and precautions when welding on a vehicle with electronic controls.
  • Using the Troubleshooting Manual – Sets out the practical diagnostic approach, including starting with the reported symptom, identifying the relevant circuit or system, checking the installation and using the appropriate diagnostic table.
  • Limp Home Test – Describes the test condition used to help distinguish an electrical problem from a hydraulic or internal transmission problem by checking the available reverse and third-range operation.
  • Section 4 — Wire Check Procedures – Contains procedures for checking opens, shorts between wires and shorts to ground, including checks at the transmission connector and internal harness.
  • Section 5 — Diagnostic Trouble Codes (DTC) – Covers DTC memory, failure records, code reading, DTC clearing, active-indicator clearing and the beginning of the troubleshooting process.
  • Beginning the Troubleshooting Process – Includes starting procedure, solenoid locations, the wire and terminal numbering scheme, and available diagnostic adapters.
  • Diagnostic Trouble Codes — Includes Index – Provides individual diagnostic code troubleshooting tables with step-by-step actions, specified values, yes/no decision paths, component checks, harness checks, repair directions and verification procedures.
  • System Responses to Faults – Addresses the transmission responses and operating restrictions associated with detected electronic control faults, including inhibited range shifts and fail-to-range conditions.
  • Performance Complaints Without DTCs – Provides troubleshooting guidance for reported transmission performance problems where no diagnostic trouble code is present, with checks directed towards electronic, installation, hydraulic and mechanical causes.
  • Wire, Terminal and Connector Repair Information – Covers inspection and repair considerations for wiring circuits, terminals, connectors and harness components used by the electronic control system.
  • Appendix Information – Includes supporting circuit and component information referred to by the diagnostic procedures, including potential circuit problems, wiring references, repair information, resistance data and the complete wiring schematic.

MODELS COVERED

Allison Transmission 1000 and 2000 Product Families automatic transmissions with the electronic control system described by publication TS3192EN.

HOW THIS MANUAL HELPS

This troubleshooting manual is intended as a diagnostic reference when an Allison 1000 or 2000 transmission records a fault, shows an inhibited function or develops a performance complaint. It helps the technician relate symptoms and diagnostic codes to the TCM, sensors, solenoids, control valve assembly, pressure switch manifold and wiring circuits. The decision tables provide a structured route through measurements, connector checks, harness inspection, component replacement and repair verification. It is most useful when read together with the related service and component information identified in the publication.

Allison 1000 2000 troubleshooting manual – MANUAL DETAILS

  • Maker: Allison Transmission
  • Models: 1000 and 2000 Product Families
  • Machine type: Automatic transmissions
  • Manual type: Electronic controls troubleshooting manual
  • Format: Digital PDF
  • Publication number: TS3192EN
  • Page count: 444 pages
  • Year: 2000

Browse all Allison Transmission manuals available from Agrimanual.

WHAT HAPPENS AFTER PURCHASE?

After purchase you will receive our download information file by email straight away; it explains how delivery works. Your manual will then be manually checked and sent to the email address used during checkout, normally within 1 to 2 hours and always within 24 hours.

WHY BUY FROM AGRIMANUAL?

  • Established in 1995 supplying technical manuals
  • Digital PDF manuals for agricultural and construction machinery
  • Large archive including rare and discontinued manuals
  • Worldwide service
  • Manual orders checked before delivery

Allison 1000 2000 troubleshooting manual