Description
Allison 1000 2000 Principles Operation Manual explains the mechanical, hydraulic and electronic operation of the Allison 1000 and 2000 Product Families, with diagnostic references, hydraulic schematics, torque paths and foldout illustrations.
WHAT THIS MANUAL CONTAINS
- Section 1 – General Description – Scope and coverage of the publication, use of illustrations, transmission design features, transmission-to-engine coupling, torque converter, planetary gearing, clutches, hydraulic system, fluid filtration, electronic controls, oil cooler manifold, remote oil cooler, oil fill tube and dipstick provision, parking pawl or parking brake, power takeoff and output flanges or yokes.
- 1–1 Scope of the Manual – Coverage of the mechanical, hydraulic and electrical components used in Allison 1000 and 2000 Product Families transmissions, with representative line drawings, cross-sections, hydraulic schematics and torque path diagrams.
- 1–2 General Description – Transmission design features, up to five forward ranges, neutral and reverse, torque-converter drive, automatic clutch operation, hydraulic supply, filtration and electronic shift control.
- Vocational Model Nomenclature – Model identification information for the vocational configurations covered by the product families.
- Transmission Identification – Identification features and information used to distinguish the transmission configuration.
- Metric Configuration – Metric configuration details relevant to the transmission design.
- Section 2 – Module Description and Operation – Modular design and the function of the major transmission modules.
- 2–1 Modular Design – The modular arrangement of the transmission and the relationship between the input, gearbox, output and oil pan or control valve modules.
- 2–2 Input Module – Torque converter operation, vortex flow, rotary flow, torque converter clutch operation, converter housing, front support and charging pump.
- 2–3 Gearbox Module – Rotating Clutch and Power Takeoff – Rotating clutch operation, power takeoff provision and the tone wheel used for turbine speed input.
- 2–4 Gearbox Module – Planetary Gears and Stationary Clutches – Planetary gear operation, sun gear, carrier, ring gear, mechanical gear ratios, main housing, stationary clutches, P1 planetary, P2 planetary, P3 planetary and main shaft.
- 2–5 Output Module – Rear cover and output shaft, parking provisions, parking pawl and transmission-mounted parking brake.
- 2–6 Oil Pan and Control Valve Module – Oil pan construction and the electro-hydraulic control valve module.
- Section 3 – Electronic Control System – External and internal electronic components, shift schedules, clutch control, communication interfaces, vehicle wiring, special input and output functions and external harnesses.
- 3–1 External Components – Transmission Control Module inputs, shift calibration, adaptive control, inhibits, diagnostic functions, throttle position input, automatic throttle position calibration, engine, turbine and output speed sensors, shift selector, manual selector valve and neutral start backup switch.
- 3–2 Internal Components – Pulse-width-modulation solenoids, normally closed shift solenoids, clutch trim solenoids, pressure switch manifold and internal wiring harness.
- 3–3 Shift Schedules – Primary and secondary shift schedules, hold upshift, shift calibration and preselect downshift features.
- 3–4 General Clutch Control – Pre-shift control, clutch control and post-shift control.
- 3–5 Communications Interfaces – SAE J1850 and SAE J1939 communication interfaces.
- 3–6 Vehicle Interface Wiring – Vehicle interface wiring arrangements connecting the transmission control system.
- 3–7 Special Input and Output Functions – Special transmission control input functions and output functions.
- 3–8 External Harnesses – External harness arrangements and connections.
- Section 4 – Electronic Diagnostics – Diagnostic capability, diagnostic tool use, diagnostic trouble codes, code display procedure, Check Trans light operation and range or shift tests.
- 4–1 Diagnostics Capability – Diagnostic tool functions, diagnostic trouble codes and the procedure for displaying diagnostic codes.
- 4–2 Check Trans Light – Use of the transmission warning indicator as part of the electronic diagnostic system.
- 4–3 Range and Shift Tests – Range verification test, off-going ratio test, oncoming ratio test and shift valve integrity test.
- Section 5 – Hydraulic Control System – Hydraulic control overview, schematics, hydraulic passage identification, control circuits, hydraulic components, range operation and clutch application.
- 5–1 Hydraulic Control System – Hydraulic control system overview, schematic references and hydraulic passage identification.
- 5–2 Hydraulic Control System Components – Main-pressure circuit, modulated main pressure, control main circuit, control main relief valve, control main filter, torque converter circuit, converter operation, torque converter clutch operation, converter relief valve, cooler and lubrication circuit, exhaust circuit, suction circuit, exhaust backfill circuit, trim solenoids and trim valves.
- 5–3 Hydraulic Control System Circuits – Neutral, first, second, third, fourth, fifth and reverse range operation, including lockup operation.
- 5–4 Clutch Application – Normal clutch application and clutch operation during electrical interruption.
- Section 6 – Torque Paths Through the Transmission – Torque converter operation, torque converter clutch operation and torque paths for neutral, first, second, third, fourth, fifth and reverse ranges.
- Foldout Illustrations – 1000 Product Family cross-section, 2000 Product Family cross-section, 2000 Product Family with park pawl, 1000 direct-mount converter housing and transfer case adapter, neutral or park hydraulic schematic, first through fifth range hydraulic schematics, reverse range schematics, limp-home mode schematics and hydraulic passage identification for the converter housing, main housing, oil pump and control valve assemblies.
MODELS COVERED
Allison 1000 and 2000 Product Families transmissions, including 1000 Series, 2000 Series and 2400 Series configurations identified within the publication.
HOW THIS MANUAL HELPS
This principles of operation manual helps technicians understand how the transmission’s mechanical, hydraulic and electronic systems work together. It can be used as a technical reference when studying component function, shift control, hydraulic circuits, diagnostic capability and torque flow. The foldout schematics and cross-sectional illustrations help relate internal components to the operating sequence. It supplements detailed service, troubleshooting and repair publications rather than replacing them.
Allison 1000 2000 Principles Operation Manual – MANUAL DETAILS
- Maker: Allison Transmission
- Models: 1000 and 2000 Product Families; 1000 Series, 2000 Series and 2400 Series configurations
- Machine type: Automatic transmissions
- Manual type: Principles of Operation
- Format: Digital PDF
- Publication number: PO3065EN
- Page count: 105 pages
- Year: 2000
Browse all Allison Transmission manuals available from Agrimanual.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will receive our download information file by email straight away; it explains how delivery works. Your manual will then be manually checked and sent to the email address used during checkout, normally within 1 to 2 hours and always within 24 hours.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery

