Description
John Deere 2010 Crawler Service Manual provides a structured repair reference for diagnosis, servicing, adjustment, dismantling, inspection and reassembly of the 2000 Series crawler tractor.
WHAT THIS MANUAL CONTAINS
- Description and Specifications – General machine description followed by the principal specifications needed when identifying components, checking dimensions and carrying out workshop work.
- Tractor Separation – Procedures for separating the front-end support from the engine, removing the engine from the clutch housing, separating the transmission from the clutch housing, separating the steering-clutch housing from the transmission, and separating the final drive from the steering-clutch housing.
- Periodic Lubrication – Lubrication timetable and the scheduled lubrication points required for routine service of the crawler tractor.
- Engine Tune-Up and Tractor Adjustment – Purpose of tune-up and adjustment, engine tune-up work, and the adjustments needed to keep the tractor correctly set up.
- Engine (Basic) – Gasoline – Gasoline engine description, cylinder head, manifold and muffler, pistons and connecting rods, crankshaft, main bearings, camshaft, cylinder block, flywheel and specifications.
- Engine (Basic) – Diesel – Diesel engine description, cylinder head, manifold and muffler, pistons and connecting rods, crankshaft, main bearings, camshaft, cylinder block, flywheel and specifications.
- Engine Lubrication System – Oil pump and oil filter service information for the engine lubrication circuit.
- Governor and Speed Control Linkage – Governor servicing together with separate speed-control linkage information for gasoline and diesel engine arrangements.
- Cooling System – Cooling-system description and servicing, radiator, pressure cap, fan assembly, water pump, thermostat and water manifold.
- Gasoline Fuel System – Carburettor, fuel tank, fuel filter, oil-bath air cleaner, pre-cleaner and dry-type air cleaner information.
- Diesel Fuel System – Fuel-system description and fuel-oil specifications, fuel tank, fuel strainer, fuel filters, fuel injection pump, injector nozzles, turbulence chambers, oil-bath air cleaner, pre-cleaner and dry-type air cleaner.
- Electrical System – Distributor, coil, spark plugs, glow plugs, battery, lighting system, starting system and electrical specifications.
- Engine Clutch – Constant Mesh Transmission – Clutch assembly, clutch controls and clutch housing for the constant-mesh transmission arrangement.
- Clutch Disconnect and Clutch Pedal – H-L-R Transmission – Clutch assembly, clutch-disconnect controls, clutch-pedal linkage and clutch housing for the H-L-R transmission.
- Transmission and Ring Gear – Constant Mesh – Description and operation, shifter mechanism, transmission front cover, powershaft drive shaft and gears, range-change unit, speed-change unit, ring gear and hub assembly, plus specifications.
- Transmission and Ring Gear – H-L-R – Description and operation, shifter mechanism, transmission front cover, powershaft driven gear, range-change clutch unit, speed-change unit, ring gear and hub assembly, and H-L-R transmission specifications.
- Power Take-Off, Auxiliary Pump Drive and Winch Drive – Powershaft clutch drive shaft and oil impeller, auxiliary pump drive, winch drive and the single 1000 RPM power take-off.
- Series 20 Winch – Winch assembly servicing, winch hydraulic control and accumulator, winch fairlead assembly, troubleshooting and winch specifications.
- Final Drives, Steering Clutch and Brakes – Description and adjustment, final-drive service, steering clutches and brakes, steering-clutch pressure plate and related specifications.
- Hydraulic System – Hydraulic pump service information for the tractor hydraulic system.
- 3-Point Hitch and Drawbar – Service information for the three-point hitch and drawbar arrangement.
- Track System – Track-system description and adjustment, tracks, track carrier assemblies and track specifications.
- Troubleshooting – Fault-finding information covering the H-L-R transmission.
MODELS COVERED
This manual covers the John Deere 2000 Series crawler tractor, specifically the 2010 crawler tractor configuration. The publication is intended for crawler models rather than the separate 2000 Series wheel-tractor manuals.
HOW THIS MANUAL HELPS
Use this service repair manual when a John Deere 2010 crawler requires inspection, adjustment, component removal or repair planning. Its sectioned layout takes you from machine specifications and separation procedures through the engine, transmission, final drives, hydraulics and track system. The gasoline and diesel engine sections, together with the two transmission arrangements, help you refer to the relevant configuration before starting workshop work. The troubleshooting section provides additional guidance for H-L-R transmission faults.
John Deere 2010 Crawler Service Manual – MANUAL DETAILS
- Maker: John Deere
- Models: 2000 Series crawler tractor; 2010 crawler tractor
- Machine type: Crawler tractor
- Manual type: Service repair workshop manual
- Format: Digital PDF
- Language: English
- Publication number: SM2037
- Page count: 456 pages
- Years: 2000–2010
Browse all John Deere manuals available from Agrimanual.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will receive our download information file by email straight away; it explains how delivery works. Your manual will then be manually checked and sent to the email address used during checkout, normally within 1 to 2 hours and always within 24 hours.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery
