Description
Case 1150M service manual for the Power Angle Tilt blade Long Track non-regulated configuration, covering practical inspection, maintenance, adjustment, removal, installation and repair information for the specified machine family.
WHAT THIS MANUAL CONTAINS
- Introduction – Publication information, machine application details, servicing guidance, safety requirements, environmental precautions and general workshop instructions for the 1150M crawler dozer.
- Safety Rules – Safe servicing practices, warning information, machine isolation, prevention of unexpected movement, handling of pressurised systems and precautions for fuel, oil, coolant and electrical work.
- Safety Rules – Ecology and the Environment – Correct handling of drained fluids, coolant, batteries, air-conditioning gases and other materials generated during servicing and repair.
- Safety Rules – Do Not Operate Tag – Procedures for identifying a machine that must not be operated while inspection, maintenance or repair work is in progress.
- Basic Instructions – Shop and Assembly – Workshop preparation, component cleanliness, seal and O-ring installation, sealing compounds, fastener handling, spare-part identification and general assembly practices.
- Torque – Minimum Tightening Torques for Normal Assembly – General tightening information for standard fasteners used during servicing and reassembly.
- Torque – Standard Torque Data for Hydraulics – Tightening information for hydraulic connections and fittings, supporting correct assembly of hydraulic circuits.
- Torque – Special Torques – Specified tightening values for components requiring settings beyond the normal assembly data.
- Engine and crankcase – Engine-related servicing, crankcase work and assembly information, including driveshaft alignment between the engine and tandem pumps.
- Air cleaners and lines – Removal and installation of the primary and secondary air filter elements, air-intake housing service, sealing checks and post-service operation checks.
- Fuel filters – Fuel-filter replacement, cleaning around the filter head, fuel shut-off procedures, leak checks and removal of air from the fuel system after service.
- Engine lubrication system – Engine oil and filter replacement, drain and fill procedures, oil-level checks, service specifications, leak inspection and correct reassembly of access panels.
- Aftercooler – Servicing information for the engine aftercooler system and related components.
- Engine cooling system – Cooling-system inspection and repair information, including precautions for coolant, leaks and pressurised circuits.
- Fan and drive – Inspection and servicing information for the engine fan and its drive arrangement.
- Hydrostatic drive – Service information for the machine hydrostatic drive system and associated drive components.
- Pump and motor components – Servicing of hydrostatic pump and motor components, including component removal, inspection and installation references.
- Brakes and controls – Brake-related service information and control-system procedures for the crawler dozer.
- Parking brake or parking lock – Inspection, adjustment and repair information for the parking-brake or parking-lock arrangement.
- Hydraulic service brakes – Service procedures for the hydraulic service-brake system and its related components.
- Hydraulic systems – Hydraulic circuit servicing, component handling, pressure-system precautions and repair information for the machine hydraulic equipment.
- Maintenance chart – Scheduled maintenance actions covering engine oil, coolant, hydraulic oil, grease points, track-shoe bolt torque, filters, track tension, final-drive oil, air filters, cab filters, ROPS, doors, windows and ripper components.
- Basic Instructions – Moving a Disabled Machine – General information for preparing and moving a disabled machine safely.
- Hydraulic Contamination – Preventing contamination during hydraulic service and protecting system reliability while components are open.
- Consumables Loctite Product Chart – Listed consumable and thread-locking product information used with the service procedures.
MODELS COVERED
1150M Power Angle Tilt (PAT) Blade, Long Track (LT), non-regulated configuration for PIN NCDC11500 and above, NDDC11000 and above, NEDC11000 and above, and NFDC11000 and above. This listing is specifically aligned with the NFDC11000 and above application.
HOW THIS MANUAL HELPS
This Case 1150M service manual provides a structured repair reference for technicians working on the crawler dozer and its Power Angle Tilt blade configuration. It brings together safety information, workshop practices, torque data, maintenance schedules and system-specific servicing subjects. The sections help with planned maintenance, fault investigation, component removal, inspection, adjustment and reassembly. Use the machine PIN and the configuration details to confirm that the procedures match the equipment being serviced.
Case 1150M service manual – MANUAL DETAILS
- Maker: Case IH
- Models: 1150M Power Angle Tilt (PAT) Blade, Long Track (LT), non-regulated
- Machine type: Tier 2 crawler dozer
- Manual type: Service manual
- Format: Digital PDF
- Publication number: 47907867
- Edition: 2nd edition, English
- Page count: 51 pages
- Year: 2015
- Serial range: PIN NCDC11500 and above; NDDC11000 and above; NEDC11000 and above; NFDC11000 and above
ALSO LISTED UNDER THESE TITLES
This publication (47907867) is also catalogued under these titles:
- Case 1021G Zbar EH New CAB Tier 2 Wheel Loader Workshop Service Repair Manual
- Case 1121G Zbar EH New CAB Tier 2 Wheel Loader Workshop Service Repair Manual
- Case 1150M Power Angle Tilt (PAT) Blade Long Track LT Non-regulated (NDDC11000& Above) Workshop Service Repair Manual
- Case 1150M Power Angle Tilt (PAT) Blade Long Track LT Non-regulated (NEDC11000& Above) Workshop Service Repair Manual
- Case 1150M Power Angle Tilt (PAT) Blade Wide Track WT Non-regulated (NCDC11500& Above) Manual
- Case 1150M Power Angle Tilt (PAT) Blade Wide Track WT Non-regulated (NDDC11000 & Above) Manual
- Case 1150M Power Angle Tilt (PAT) Blade Wide Track WT Non-regulated (NFDC11000& Above) Manual
- Case 1150M Tier 2 Crawler Dozer PIN NCDC11500 & Above Workshop Service Repair Manual
- Case 1150M Tier 2 Crawler Dozer PIN NEDC11000 & Above Workshop Service Repair Manual
- Case 1150M Tier 2 Crawler Dozer PIN NFDC11000 & Above Workshop Service Repair Manual
Browse all Case IH manuals available from Agrimanual.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will receive our download information file by email straight away; it explains how delivery works. Your manual will then be manually checked and sent to the email address used during checkout, normally within 1 to 2 hours and always within 24 hours.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery
