Description
Case IH 1150M workshop service manual covering the Long Track crawler dozer with Tier 4B (final) and Stage IIIB specifications for machines from PIN NGC105100 onwards.
WHAT THIS MANUAL CONTAINS
- Introduction – Foreword and important notice regarding equipment servicing, safety rules, personal safety, ecology and the environment, and the do-not-operate warning tag procedure.
- Torque specifications for normal assembly – Minimum tightening torques for metric and inch hardware, including flanged and non-flanged bolts, nuts, locknuts, property classes, grade identification and plated or unplated fasteners.
- Hydraulic torque data – Standard torque information for hydraulic connections, including British Standard Pipe Parallel, metric O-ring face seal, inch O-ring boss, O-ring face seal hose connectors and four-bolt flange connections.
- Hydraulic connection installation – Tightening procedures for tapered thread connections, adjustable and non-adjustable O-ring boss connectors, port plugs and related hydraulic fittings.
- Special torques – Application-specific torque values for components including the ripper, hydraulic pump, pump and motor assemblies, engine mounts, engine-to-pump drive shaft, rear frame cover, tracks, final drives, cab mounts, air-conditioning compressor and hydraulic cylinders.
- Engine and crankcase – Service information for the engine assembly and crankcase section identified as [10.001].
- Air cleaners and lines – Maintenance and repair information for the engine air-cleaning equipment and associated lines under [10.202].
- Fuel filters – Procedures and technical information for the fuel-filter section identified as [10.206].
- Fuel tanks – Service coverage for the fuel-tank assembly under [10.216].
- Engine lubrication system – Technical service information for the engine lubrication system identified as [10.304].
- Aftercooler – Component information for the aftercooler section under [10.310].
- Engine cooling system – Service coverage for the cooling system under [10.400], together with basic cooling-system instructions and coolant information.
- Fan and drive – Repair reference for the engine fan and drive assembly identified as [10.414].
- Selective Catalytic Reduction exhaust treatment – Technical information for the SCR exhaust-treatment section under [10.500].
- Hydrostatic drive – Pump and motor components, including the [29.218] hydrostatic drive section.
- Brakes and controls – Parking brake or parking lock information under [33.110] and hydraulic service brake information under [33.202].
- Hydraulic systems – General hydraulic systems, reservoir, cooler and filters, fixed displacement pump, charge pump, main control valve and dozer blade cylinders.
- Tracks and track suspension – Track frame and driving wheels, tracks, track tension units, track rollers and the tracks and track suspension generic sub-group.
- Cab climate control – Heating, ventilation and air-conditioning sections covering [50.100], [50.104] and [50.200].
- Electrical systems – Electrical system, fuel tank system, engine intake and exhaust system, engine control system, service brake electrical system, HVAC control system, harnesses and connectors, engine starting system, cold start aid, alternator, battery, warning indicators, alarms, instruments, cab controls, wiper and washer system, SCR electrical system and fault codes.
- Dozer blade and arm – Dozer blade and dozer pushbeams and struts under sections [86.110] and [86.124].
- Platform, cab, bodywork and decals – Service information for the platform, cab, bodywork and decals section.
- Basic shop and assembly instructions – General workshop and assembly guidance for carrying out service work on the machine.
- Maintenance chart – Maintenance actions and intervals covering daily inspection, engine oil, engine coolant, hydraulic oil, grease points, track shoe bolt torque, filters, ROPS, cab air filters and SCR system service items.
- Moving a disabled machine – Procedures for enabling tow mode, bypassing hydrostatic pumps, releasing the spring-applied hydraulic parking brakes, towing limits and returning the machine to service.
MODELS COVERED
Case IH 1150M Long Track (LT) crawler dozer, Tier 4B (final) and Stage IIIB, for PIN NGC105100 and above. The publication also identifies the 1150M Wide Track (WT) and Low Ground Pressure (LGP) configurations within the same service-manual coverage.
HOW THIS MANUAL HELPS
This workshop reference is intended for diagnosis, servicing, adjustment, component removal, inspection and reassembly on the Case IH 1150M crawler dozer. The system-based layout brings engine, hydrostatic drive, hydraulics, tracks, electrical equipment, climate control and dozer equipment information together in one repair reference.
Torque charts, safety instructions, maintenance information and disabled-machine procedures support practical workshop work. Use the applicable machine identification and section reference before beginning repairs or adjustments.
Case IH 1150M workshop service manual – MANUAL DETAILS
- Maker: Case IH
- Models: 1150M Long Track (LT); coverage also identifies 1150M Wide Track (WT) and Low Ground Pressure (LGP)
- Machine type: Crawler dozer
- Manual type: Workshop service manual
- Format: Digital PDF
- Publication number: 48080033
- Page count: 61 pages
- Edition: 1st edition, English, January 2017
- Serial range: PIN NGC105100 and above
ALSO LISTED UNDER THESE TITLES
This publication (48080033) is also catalogued under these titles:
- Case 1150M Tier 4B (Final) Crawler Dozer PIN NGC105100 & Above Workshop Service Repair Manual
- Case 1150M Tier 4B (Final) Crawler Dozer PIN NGC105100 and Above Workshop Service Repair Manual
- Case 1150M Wide Track (WT) Low Ground Pressure (LGP) Tier 4B (Final) & Stage 3B (NGC105100 & Above) Manual
Browse all Case IH manuals available from Agrimanual.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will receive our download information file by email straight away; it explains how delivery works. Your manual will then be manually checked and sent to the email address used during checkout, normally within 1 to 2 hours and always within 24 hours.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery
