Description
Allison Transmission Alpha I Gen II Manual provides a practical digital PDF repair reference for Alpha I Gen II outdrives, with workshop information covering identification, service procedures, component work, inspection and adjustment.
WHAT THIS MANUAL CONTAINS
- General Information – how to use the manual, page numbering, introduction, special product information, directional references and propeller rotation.
- Serial Number Identification – serial number locations for the transom assembly and sterndrive unit, together with the engine designation decal and gear ratio decal locations.
- Decal Removal and Application – decal removal, surface cleaning, wet-application tools, wetting solution, positioning, squeegee technique, masking removal and treatment of trapped bubbles.
- Painting Procedures – preparation of aluminium propellers and gear housings, cleaning, sanding, primer application, finish coatings and precautions for protecting trim tabs and anodes.
- Overhaul and Repair Guidance – the publication is arranged as a service guide for major components and systems, with repair information intended to support disassembly, inspection, assembly and adjustment.
- Special Product Information – product improvements and changes affecting sterndrive assembly components, with applicable information placed in the relevant sterndrive section.
- Directional References – bow, stern, starboard and port references as viewed from the stern looking towards the bow.
- Propeller Rotation – right-hand and left-hand rotation references as viewed from the aft end of the propeller.
- Safety and Workshop Precautions – cautions and warnings to be considered before carrying out repair procedures, including protection during painting and surface preparation.
- Aluminium Propeller Refinishing – removal of damaged paint, feathering of paint edges, degreasing, primer use, drying intervals and application of the specified propeller finish.
- Gear Housing Refinishing – removal of marine growth and blistered paint, cleaning, alodine treatment, epoxy chromate primer, masking of mating areas and application of top coats.
- Component and System Organisation – sections represent major components and systems, with further division into parts where more detailed component information is required.
MODELS COVERED
Alpha I Gen II outdrives and associated sterndrive unit components identified within Service Manual Number 14.
HOW THIS MANUAL HELPS
This workshop service manual is intended to help with the practical examination and repair of Alpha I Gen II outdrive components. It provides the manual structure, identification information, preparation guidance and service references needed before dismantling or reassembling components. Use the applicable section to check procedures, cautions, component references and adjustment information during workshop work.
Allison Transmission Alpha I Gen II Manual – MANUAL DETAILS
- Maker: Allison Transmission
- Models: Alpha I Gen II outdrives
- Machine type: Marine sterndrive units
- Manual type: Workshop service repair manual
- Format: Digital PDF
- Publication number: 90-818177-3
- Manual number: 14
- Printed edition: April 2001
Browse all Allison Transmission manuals available from Agrimanual.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will receive our download information file by email straight away; it explains how delivery works. Your manual will then be manually checked and sent to the email address used during checkout, normally within 1 to 2 hours and always within 24 hours.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery

