Workshop manuals for agricultural & construction machinery

Trusted Since 1995
Digital PDF manuals • Worldwide service

Allison Transmission B 400 Workshop Service Manual – Pub No. SM2148EN — SKU: Allison Transmission 41

£29.00

The Allison Transmission B 400 Service Manual is a detailed digital PDF workshop reference for maintenance, diagnosis, disassembly, inspection, module rebuilding and reassembly. It covers B 400 variants alongside related MD/B 300/B 400 configurations, with technical data, wear limits, spring information, torque specifications, exploded views and hydraulic schematic support.

Description

Allison Transmission B 400 Service Manual provides structured workshop information for servicing, dismantling, inspecting, rebuilding and assembling the MD/B 300/B 400 series automatic transmission family, with model-specific procedures, technical data, illustrations and hydraulic information.

WHAT THIS MANUAL CONTAINS

  • General information – manual scope, content organisation, transmission component functions, model identification, major modules, control-system information, transmission features, illustrations, cross-sectional views and service cautions.
  • Transmission identification and configuration – MD/B 300/B 400 transmission arrangements, four-, five- and six-forward-speed configurations, input, main housing and gear, control and output modules, speed sensors, oil-fill provisions, cooler connections and optional PTO arrangements.
  • Electronic controls and diagnostic data reader information – electronic control unit functions, diagnostic data reader/tool displays, shift selector terminology, diagnostic information and control-system operating limits.
  • Preventive maintenance – maintenance intervals, fluid-level checking, cold and hot checks, fluid-level reading procedures, fluid leakage inspection, oil-filter service, breather maintenance and transmission condition checks.
  • Fluid and filter change procedure – draining transmission fluid, replacing filters on MD 3060, MD 3560, B 300 and B 400 units, filter replacement for MD 3070PT, refilling procedures and fluid quantities.
  • Checking clutch pressures – transmission and vehicle preparation, recording pressure data, comparing measured values with specifications, use of clutch test mode and assessment of individual clutch pressures.
  • Transmission stall test – purpose of the test, preparation, procedures without Pro-Link, procedures with Pro-Link, smoke-controlled engine procedures, neutral cool-down checks and interpretation of stall-test results.
  • On-vehicle maintenance – servicing available with the transmission installed in the vehicle, output-yoke and oil-seal maintenance, MD 3070PT yoke and seal procedures, and related removal and installation instructions.
  • General overhaul information – required tools and equipment, improvised tools, special tools, mechanic’s tools and shop equipment, replacement-part information, parts normally replaced during overhaul, careful handling, cleaning and inspection practices.
  • Cleaning and inspection – cleaning parts and bearings, keeping bearings clean, inspecting bearings, castings, machined surfaces, bushings, thrust washers, seal rings, gaskets, gears, splined parts, threaded parts, retaining rings, springs, clutch plates, swaged and interference-fit parts, retarder components and sealing surfaces.
  • Assembly procedures – parts lubrication, assembly grease, sealing compounds, clutches and pistons, threaded plugs and hydraulic fittings, lip-type seals, butt-joint seal rings, bearings and electrical components.
  • Removing or installing the transmission – draining fluid, disconnecting controls, uncoupling the driveline, vehicle and engine, removing the transmission, and associated installation considerations.
  • Transmission disassembly – mounting the transmission on a repair stand, removing common externally mounted parts, speed sensors, integral oil cooler, power take-offs, MD 3070PT transfer-case module, control module, torque-converter module, converter housing, retarder module, adapter housing, rear cover, main shaft, planetary modules, front support, charging pump, rotating clutch and C3/C4 clutch assembly.
  • Torque converter module rebuild – module disassembly and assembly, converter components, lock-up clutch and torsional-damper-related service information.
  • Torque converter housing module – procedures for models without a PTO provision and models with a PTO provision, including module disassembly, bearing and retainer work, PTO gear assembly and module assembly.
  • Front support and charging oil pump module – module disassembly, front-support assembly and pump-housing assembly.
  • Rotating clutch and main housing modules – rotating-clutch disassembly and assembly, C3/C4 clutch and main-housing procedures, piston and clutch component service, and reassembly checks.
  • Main shaft and planetary modules – MD 3060, MD 3066, B 300 and B 400 main-shaft procedures, MD 3560 and MD 3070PT variations, P1 planetary-module disassembly and assembly, and P2 planetary-module disassembly and assembly.
  • Retarder, rear cover and adapter housing – retarder valve-body, wiring-harness and temperature-sensor procedures, retarder housing, P3 planetary carrier and stator service, rear-cover-module overhaul, adapter-housing and P3 overhaul, and related assembly work for units built before and from January 1998.
  • Transfer-case module – transfer-case disassembly, C6 and C7 clutch service, oil-pump disassembly and assembly, P4 carrier procedures, drive, idler and driven gears, front and rear output housings, output-shaft work, bearing preload and transfer-case assembly.
  • Control valve module – filter removal, electrical-component and sensor removal, rotating and stationary clutch solenoid bodies, C6 control valve body, main valve body, channel plate, C7 control valve body, wiring harness, cover plate and control-valve assembly procedures.
  • Transmission assembly – C3/C4 clutch installation, rotating clutch, front support and charging-pump module, P1 and P2 planetary modules, C5 clutch pack, main shaft, selective shim measurements, retarder module, rear cover, transfer-case adapter housing, transfer-case module, converter housing, torque converter, control module, PTOs, integral oil cooler, speed sensors and externally mounted parts.
  • Wear limits and spring data – maximum permissible variations, cleaning requirements before measurement, component wear limits, spring replacement, spring inspection, load-height information and cross-reference to the exploded views.
  • Supporting illustrations and hydraulic schematic – cross-section views for MD 3060/B 300, MD 3060R/B 300R, MD 3060PR/B 300PR, MD 3066/B 400PR, MD 3560PR and MD 3070PT; exploded views for converter, pump, clutch, housing, shaft, planetary, retarder, transfer-case, control-valve, output, oil-cooler and support-equipment assemblies; plus the MD/B 300/B 400 neutral hydraulic schematic.

MODELS COVERED

Allison B 400, B 400P, B 400PR and B 400R transmissions are covered within the MD/B 300/B 400 service-manual family. The same publication also identifies related MD 3060, MD 3066, MD 3560, MD 3070PT, B 300, B 300P, B 300PR and B 300R variants where the relevant overhaul procedures, illustrations or module arrangements differ.

Allison Transmission B 400 Service Manual – MANUAL DETAILS

  • Maker: Allison Transmission
  • Models: B 400, B 400P, B 400PR and B 400R, with related MD/B 300/B 400 variants listed above
  • Machine type: On-highway automatic transmission
  • Manual type: Workshop service and overhaul manual
  • Format: Digital PDF
  • Publication number: SM2148EN
  • Page count: 140 pages
  • Publication date: December 1998

HOW THIS MANUAL HELPS

This Allison Transmission B 400 Service Manual is arranged as a practical repair reference for technicians working through inspection, diagnosis, removal, overhaul and reassembly tasks. It brings together maintenance checks, pressure testing, disassembly instructions, module rebuilding, measurements, wear limits and assembly procedures. The detailed component sections help users follow the transmission through its converter, clutch, planetary, retarder, transfer-case and control-valve assemblies. Supporting exploded views, cross-sections and hydraulic information assist with component identification and correct workshop sequence.

For B 400 servicing, the Allison Transmission B 400 Service Manual gives particular value when a transmission must be assessed beyond routine fluid and filter maintenance. It includes procedures for checking clutch pressures, conducting stall tests, inspecting internal parts and applying specified wear and spring data during overhaul. The publication also distinguishes relevant arrangements and production changes, including retarder units built before and from January 1998 and control-valve variants identified by serial-number ranges.

The Allison Transmission B 400 Service Manual covers both complete transmission disassembly and final assembly. Its module-by-module structure includes the torque converter, converter housing, front support and charging pump, rotating clutch, main housing, main shaft, planetary modules, retarder, rear cover, transfer case and control valve. This makes it suitable as a workshop reference when tracing a repair from removal through cleaning, inspection, rebuilding, selective-shim measurement and installation.

Technical data is supported by wear-limit tables, spring information, torque specifications, special-tool references and illustrated foldouts. The Allison Transmission B 400 Service Manual also includes cross-sectional views for related MD and B-series configurations, helping technicians compare component positions and assembly relationships where the transmission variant requires a different arrangement. The information is focused on service and overhaul work rather than general vehicle operation.

Use the Allison Transmission B 400 Service Manual alongside the identification details on the transmission being serviced. Confirm the model designation, production arrangement, retarder configuration, PTO provision, control-valve version and applicable serial information before carrying out repairs. The manual’s procedures and illustrations are intended to support careful workshop inspection, component handling, rebuilding and reassembly of the covered transmission family.

Browse all Allison Transmission manuals available from Agrimanual.

WHAT HAPPENS AFTER PURCHASE?

After purchase you will receive our download information file by email straight away; it explains how delivery works. Your manual will then be manually checked and sent to the email address used during checkout, normally within 1 to 2 hours and always within 24 hours.

WHY BUY FROM AGRIMANUAL?

  • Established in 1995 supplying technical manuals
  • Digital PDF manuals for agricultural and construction machinery
  • Large archive including rare and discontinued manuals
  • Worldwide service
  • Manual orders checked before delivery

Allison Transmission B 400 Service Manual