Description
Claas Targo K50 K60 K70 Electrical & Hydraulics Technical Manual
Claas Targo K50 K60 K70 Electrical & Hydraulics Technical Manual is a focused technical repair manual for the electrical and hydraulic systems fitted to Claas Targo Series K machines, covering the K50, K60 and K70 models. It combines hydraulic circuit information, component operation, pressure checks, repair procedures and electrical circuit diagrams.
This is not a general operator handbook. It is intended for fault-finding, testing, removal, installation, servicing and adjustment work on the machine’s hydraulic equipment, braking and steering circuits, electrical installations and associated controls. The contents distinguish between applicable machine serial-number breaks where equipment changed.
WHAT THIS MANUAL CONTAINS
- Introduction, identification and safety information – general machine identification, health and safety material, and hydraulic-pressure dumping procedures before work is undertaken.
- Hydraulic circuit diagrams – single- and dual-circuit braking hydraulic layouts, presented for the relevant machine serial-number versions.
- Hydraulic system description and operation – hydraulic-system function, relief-valve operation, load-sensing pump operation, standby and delivery conditions, constant-flow operation, pump downstroking and maximum-pressure limiting.
- Hydraulic pressure testing and pump adjustment – system-pressure checks, load-sensing pump checks, compensator operation and pump adjustment procedures.
- Hydraulic tank and filtration – hydraulic tank, suction and return-line connections, tank filter, pressure filter, filler and breather servicing.
- Hydraulic pumps and cooling equipment – removal and installation of the load-sensing hydraulic pump, auxiliary pump, fan motor, fan-drive bearings, fan-reverse valve and oil-cooler-related equipment where fitted.
- Brake hydraulics – brake servo valves, parking-brake valve arrangements, pressure-reducing equipment, brake pressure switches, trailer brake valve and trailer brake coupling information.
- Brake valve repair – removal, installation, servicing, dismantling and assembly of applicable MICO and SAFIM single- and dual-brake valve assemblies, including brake master and valve modules.
- Brake bleeding – general brake-system bleeding procedures following hydraulic brake-system work.
- Steering system – front and rear steering cylinders, steering valve operation, steering selector valve, steering-system checks, OSPF steering unit and steering valve assembly servicing.
- Main hydraulic control valve – control-valve removal, installation and overhaul, including inlet and outlet sections, spool sections, extension, crowd, lift and first/second-service functions.
- Hydraulic attachments and services – accumulator, diverter valve, manifold, autohitch cylinder, service couplings and trailer-tipping connection coverage.
- Hydraulic cylinders – removal, installation and servicing information for extension, crowd, compensator, lift, autohitch, carriage-locking and steering cylinders, including dismantling and assembly where specified.
- Electrical circuit diagrams – circuit-diagram keys, wiring terminations, component identification and separate diagrams for the applicable Tier 0 & 1 and Tier 2 electrical arrangements.
- Starting and charging circuits – power generation, starter and alternator circuits, alternator drive-belt checks, and starter/alternator removal and installation.
- Hydraulic and safety-control electrics – wiring for hydraulic controls, steering control, safe-load indication, lock-out relays, parking-brake links and transmission-dump related circuits.
- Lighting and cab electrical equipment – worklights, boom/side worklight switching, wipers, washers, horn, headlamps, side lamps, fog lamps, number-plate lamps, indicators, reverse lamps, stop lamps, radio, interior lamp and beacon circuits.
- Instrument and sensor circuits – instrument display, sensor switches, fuel sender, hydraulic-temperature indication, fan motor, air-conditioning and fan-reverse electrical circuits.
- Longitudinal stability indicator – system description, sensor and display-module specifications, visual checks, testing, fault indication, sensor testing and installation, calibration, zero-point reset, and load-sensor functional tests.
- Electrical components and looms – chassis, engine and cab loom illustrations; main instrument panel; Solo control joystick; fusebox and relays; automatic powershift controller; and forward/neutral/reverse switch assembly procedures.
MODELS COVERED
- Claas Targo K50
- Claas Targo K60
- Claas Targo K70
The manual identifies equipment variations by serial-number break within individual procedures and circuit diagrams. This is particularly important for brake-valve, fan-motor, fan-reverse, parking-brake and electrical-circuit versions.
MANUAL DETAILS
Manufacturer: Claas
Models Covered: Targo K50, K60 and K70
Machine Type: Agricultural telehandler
Manual Type: Electrical & Hydraulics Technical Manual / Wiring Manual
Format: Digital PDF
Publication Number: 349599.2
Publication Date: 05/2006
Serial Information: System-specific serial-number references are included within the manual, including breaks up to 51200317, 51200471, 51200551 and 51200727, plus K5D00100, K6D00100 and K7D00100 onwards.
The Claas Targo K50 K60 K70 Electrical & Hydraulics Technical Manual is particularly useful where a repair requires both a hydraulic schematic or pressure-check procedure and the corresponding wiring, relay, sensor or control-circuit information.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will instantly receive our download information file by email. Your manual will then be manually checked and sent to the email address used during checkout, usually within minutes and normally within 1 hour.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery
Reviews
There are no reviews yet.