Description
Claas Quadrant 2200 Workshop Manual for the CLAAS QUADRANT 2200 and QUADRANT 2200 RC large square balers. This digital workshop, service and repair manual is intended for servicing, setting up, dismantling, repairing and refitting the baler assemblies covered in the manual.
The manual is particularly useful where accurate drive timing, knotter and needle settings, clutch work, gearbox repair or feed-rake adjustment is required. It combines repair instructions with setting dimensions, torque information, oil quantities, illustrations and procedural guidance for the machine systems documented.
WHAT THIS MANUAL CONTAINS
- General repair information – repair guidance, safety-related preparation for work on the large baler, graphic symbols used throughout the procedures, and notes on correct dismantling and assembly practice.
- Specifications and service data – technical specifications, oil quantities, and torque specifications for hydraulic connections using ISO 6149 O-ring seals.
- Basic drive settings – procedures for timing and aligning the baler drives to their reference markings before adjustment or repair work.
- Needle-to-piston timing – checking and correcting the relationship between the needles and baling ram/piston as part of the drive-setting procedure.
- Feed-rake drive setting – setup of the crankshaft drive and feed rake, including the specified feed-rake position check and adjustment through the drive-shaft installation position.
- Twine-wrap device settings – basic adjustment work for the tying system, including preparation of the knotter shaft and needles.
- Needle adjustment – setting the lateral position, height and top-dead-centre position of the needles, plus checks of needle travel relative to the knotter frames and piston.
- Needle yoke and knotter-shaft brakes – adjustment of the brakes used to control needle and knotter-shaft movement and reduce whip effects.
- Knotter adjustments – clamping-plate and knotter-hook spring settings, knotter-pinion play adjustment, twine-finger setting, and ram-stop adjustment procedures.
- Knotter drive – removal, dismantling, inspection-related breakdown, assembly and refitting procedures for the control shaft, knotter shaft, knotter-shaft clutch, countershaft and knotter gearbox.
- Machinery drive – repair work for the main machine drive, including removal and dismantling of the friction clutch.
- Repair sequence information – illustrated removal, disassembly, assembly and installation instructions, supported by component markings, setting references and specified tightening values where applicable.
MODELS COVERED
- CLAAS QUADRANT 2200 square baler
- CLAAS QUADRANT 2200 RC / Roto Cut square baler
MANUAL DETAILS
Manufacturer: Claas
Models Covered: QUADRANT 2200 and QUADRANT 2200 RC / Roto Cut
Machine Type: Large square baler
Manual Type: Workshop Service Repair Manual
Format: Digital PDF
Coverage: Repair procedures, dismantling and reassembly, basic drive timing, knotter and twine-wrap adjustments, knotter-drive repair, machinery-drive work, oil quantities and technical specifications.
The Claas Quadrant 2200 Workshop Manual is suited to repair and setup work where the baler’s timing, knotter operation and mechanical drive assemblies must be returned to the specified settings.
WHAT HAPPENS AFTER PURCHASE?
After purchase you will instantly receive our download information file by email. Your manual will then be manually checked and sent to the email address used during checkout, usually within minutes and normally within 1 hour.
WHY BUY FROM AGRIMANUAL?
- Established in 1995 supplying technical manuals
- Digital PDF manuals for agricultural and construction machinery
- Large archive including rare and discontinued manuals
- Worldwide service
- Manual orders checked before delivery
Reviews
There are no reviews yet.