Description
Valtra T120-T170 Operator’s Manual is the factory operating publication for Valtra T120, T130, T140, T160 and T170 agricultural tractors. It is intended primarily for drivers of Valtra power-shuttle tractors equipped with the Autocontrol 5.3 control and information system.
This 191-page manual provides detailed guidance for safe tractor operation, identification and use of the controls, starting and driving, implement operation, scheduled servicing and routine adjustments. It also contains technical specifications and instructions for applicable extra or alternative equipment.
The publication is suitable for owners, operators, agricultural contractors and workshop personnel responsible for the correct use and routine maintenance of these tractors. It is an operator’s manual rather than a workshop overhaul manual; repairs requiring specialist tools and detailed service data are outside its stated scope.
SAFETY, INSTRUMENTS AND CONTROLS
The manual begins with tractor identification details, safety precautions and a general description of the principal systems. Its extensive controls section explains the cab controls, instrument displays and operating functions.
- Tractor, engine, cab and front axle identification numbers
- General operating and maintenance safety precautions
- Pedals, instrument panel and display functions
- Power-shuttle and parking-brake lever
- Right-hand panel and armrest controls
- Linkage, PTO and auxiliary hydraulic controls
- Service function codes and parameter resetting
- Agroline instrument panel and indicator lights
- Driver’s seat, roof console and rear controls
STARTING, DRIVING AND TRANSMISSION OPERATION
Instructions cover preparation for use, starting under normal and cold conditions, and operation of the HiTech power shuttle and Power Shift functions. Driving guidance also addresses traction, braking and safe stopping.
- First 50 hours of operation
- Normal and cold engine starting
- Auxiliary-battery jump starting
- HiShift switch and power-shuttle operation
- Power Shift programming and automatic operation
- Automatic traction control
- Differential lock and front-wheel drive
- Braking, stopping and towing the tractor
- Off-road operation and permitted driving inclinations
PTO, LINKAGE AND HYDRAULIC OPERATION
Implement-related instructions explain the rear and applicable front PTO, three-point linkage, Autocontrol hydraulic lift and auxiliary hydraulic valves. Guidance is also supplied for attaching implements and carrying out supported field operations.
- Rear PTO and PTO shaft operation
- Proportional ground-speed PTO
- Front PTO where fitted
- Three-point linkage and lifting links
- Quick couplings and check links
- Position, draft and lowering-speed control
- Transport height and floating position
- Drive balance and applicable slip control
- Auxiliary hydraulic valve functions
- Implement attachment and ploughing guidance
MAINTENANCE AND ROUTINE ADJUSTMENTS
The Valtra T120-T170 Operator’s Manual includes a structured maintenance programme extending from daily checks through major periodic intervals. It also identifies recommended fuel and lubricant requirements and provides operator-level checks and adjustments.
- Daily and weekly maintenance
- 250, 500 and 1,000-hour servicing
- 2,000 and 4,000-hour maintenance
- Fuel, lubricant and grease requirements
- Fuel-system bleeding and air-filter care
- Cooling-system maintenance
- Battery, alternator and fuse checks
- Brake pedal and parking-brake adjustment
- Brake-system bleeding
- Front-wheel toe-in, steering angle and track-width adjustment
TECHNICAL SPECIFICATIONS AND OPTIONAL EQUIPMENT
Reference data covers the tractor’s dimensions, weights, tyres, major systems and operating capacities. A dedicated section explains the operation and servicing of listed extra or alternative equipment where installed.
- Dimensions, weights and permissible axle loads
- Tyre pressures, wheel-nut torques and track widths
- Engine, fuel, cooling and electrical data
- Power-shuttle, gearbox, final-drive and PTO data
- Brake, steering and hydraulic specifications
- Front PTO and trailer-brake equipment
- Reverse-drive controls and front-axle suspension
- Air-suspension seat and air conditioning
- Trailer hitches, drawbar and front linkage
VALTRA T120-T170 OPERATOR’S MANUAL MODEL COVERAGE
- Valtra T120
- Valtra T130
- Valtra T140
- Valtra T160
- Valtra T170
Application: Valtra power-shuttle agricultural tractors equipped with the Autocontrol 5.3 control and information system. Model availability and some equipment may vary by market.
MANUAL DETAILS
- Manufacturer: Valtra
- Manual type: Operator’s Manual
- Page count: 191 pages
- Language: English
- Publication number: Not stated in the supplied extract
- Serial range: Not stated
This factory manual provides the operating and routine maintenance information needed to use the covered tractors correctly and safely. Its model-specific control descriptions, service intervals and specification tables make it a useful reference for both the cab and the agricultural workshop.
Reviews
There are no reviews yet.